Unlimited Web HostingFree Joomla TemplatesDeposit Poker
简体中文
您現在位於:首頁 新闻中心 电磁检测(EMC)讯息 具DFS功能之Master的产品最新FCC要求

具DFS功能之Master的产品最新FCC要求

一、 FCC目前仍与FAA以及NTIA一起合作发展确切的Master产品认证程序当中,以确保符合相关规定且保护TDWR的运作;在暂时的现阶段下FCC 于10月5号公告有条件地开放许可5.470 – 5.725 GHz 具DFS之Master (Band 3)设备验证许可,下述三条件必须符合

(一) 设备必须限定在室内使用

(二) 设备不得使用到 5600 – 5650 MHz 之频段

(三) 设备须要符合法规47CFR Part 15 Section 15.407,并且不得提供得以改变对于美国管制下验证许可的运作频率外之频率之控制架构。

二、 进一步说明:

(一) 所有操作在5.4GHz频段内,具有DFS功能之Master的产品都必须要将产品送交FCC 实验室进行发证前测试与产品许可作业。受证者(申请者)在暂时的现阶程序下的申请中,必须要包含适当的证明宣告,此产品仅在室内使用(经由使用手册内清楚清楚的标示或伴随该产品上标签里清处的标示),并且在报告里面呈现证明此产品无法在5600-5650MHz频段内传输。

(二) 5.25 – 5.35 GHz (Band 2) 产品还是依据FCC之前规定开放申请

三、 参考相关原文资讯:

In the interim, the Commission will allow certification of wireless master devices with radar detection function and with DFS capability, if they meet the following conditions:

- devices are intended for indoor operations only;

- devices will not permit operations on channels which overlap the 5600 - 5650 MHz band; - devices meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. All the devices operating in the 5.4 GHz band and subject to the DFS requirements must be submitted to the Commission's Laboratory Division for pre-grant testing and equipment authorization.

The grantee must ensure that the applications subject to this interim procedure must include appropriate attestations that the device is intended for indoor use (through a clear indication in a manual or labels with the device) and must demonstrate through test reports that the transmission is disabled in the 5600 - 5650 MHz band.

 
全站搜尋
員工登入



訪客數
当前有 1名访客 在线